This listing is for one large horseshoe magnet which is perfect for doing the velvet nails magnetic look.
As you can tell from the picture, it is old stock and whilst these are new, they have been sitting around in storage for a very long time.
They work amazingly though!
It measures approximately 50mm wide X 46mm high X 23mm width
These magnets are incredibly strong you need to exercise caution when using this product and storing it.
INSTRUCTIONS
1. Shake the bottle well. You only need to do this once.
2. Apply one coat of your favourite magnetic polish to all nails and allow to dry
3. Apply a generous coat to one nail only – this is especially important. The magnetic particles can only move when the polish is REALLY wet and it will start drying as soon as you apply it. If you tend to apply your coats thin, you are much less likely to see your desired effect on the nail.
4. IMMEDIATELY place your nail on the magnet for a minimum of 20 seconds.
5. Repeat this step until desired opacity is reached. ( Wait for the previous layer to be touch dry before applying your next )
6. Apply your favourite top coat if needed and immediately use the magnet again for another 30 seconds minimum. As with above, you will get better results if you do one nail at a time.
TIPS
#Always do one nail at a time and be quick! If you wait too long your polish will begin to dry and the magnetic effect will not work well.
#The longer you hold your finger on the magnet, the more pronounced the effect will be, especially after top coating.
#I’m not entirely sure it helps but I gently blow on the nail whilst it is on magnet. I feel it helps dry the top layer of the polish a little quicker and helps lock in the design a fraction more.
#Hold still. If you move the magnet or your finger around whilst trying to create your pattern, it will not be as defined as it could be.